Model No.: AQUAS COAT SA-9 (Super-Dry MuLtipurpose Waterproof Materia)

Danh mục:

Mô tả

AQUAS COAT SA-9 Ultra-fast dry multi-purpose waterproof material is

an easy-to-use ultra-fast dry water-soluble elastic coating waterproof material that has very good adhesion to all adhering surfaces and excellent waterproof performance. It is a one-component paste product that can be used immediately after opening.

Concrete, cement floor  and special binder  (polymer),

plasterboard (plaster board) ceramic, finished surfaces of terrazo and natural stone, cement mortar, balcony, swimming pool, pond, terrace, bathroom, laundry room and humid environment

Characteristics of the product

Type 1 fluid type paint paste type
 

 

Drying time

1 mm thick

drying time

10 to 15 hours Drying time

(25℃)

2 to 4 hours
Minimum

coating temperature

+5℃ Recommended

construction temperature

+5℃ ~ 35℃
After the first application

2nd application time

50 to 70 minutes (Dry condition that does not come out of the

hand)

Waiting time before application of adhesive for tile

finishing

 

3 to 5 hours

 

 

Diluent

 

Use       of       undiluted

Construction Brush, roller, spray

 

solution method
Specific

gravity

1.25 Solid

content

64 ± 1%
Amount

required

약 0.5 ~ 1.0kg / m2 Dry coating

thickness

200~350㎛
Re-painting

time

20℃, minimum 2 hours Color Skyblue / Black
The

external

appearance

reflection Number of paints 2-3
storage 18    months    (Cold    cow    with    good    ventilation,     room

temperature 5℃~30℃, humidity less than 80%)

Product Features

 

durability

It has excellent adhesion performance on moist concrete surfaces.

It is a super-fast dry type, and the drying speed is fast, so you can go to the alarm after 3 hours.

It has excellent adhesion performance such as concrete, mortar, cement, and tiles.

No chemical performance, heat resistance, oil resistance, acid resistance

and compression permanent distortion at high temperatures.

Workability Workability is very good.

There is no need for mixing due to the nature of the one-liquid paste state. It is advantageous for shortening air by shortening the re-application time.

eco-friendly

 

VIt is an eco-friendly water-soluble product free of VOC (volatile organic compounds) and organic solvents.

How to use

Surface treatment The drawing must be cleaned so that there is no cement powder, soil, sand,

or oil.

Completely remove any aged orthodontic film (paints) during repair painting.

Treat grooves or cracks as a crack repair material product.

Constructi

on method

After the surface treatment, apply it 2~3 times with a roller and brush
□ Do not let this paint come into contact with your eyes.
□ Do not mix this product with other paints.
At the □   Please wash the exposed skin thoroughly after completion of construction.

□   Do not apply it to the lower and cement-based lower surfaces where the

time of humidity is 3% or higher.
construction □    Protect the surface from getting wet for at least 1 hour to 2 hours after
the first application of the waterproofing material and 3 hours to 4 hours
   precautions after the second application. (Time is applied to dry mise floor with a
temperature of +23℃ and a relative humidity of 50% of the air and less than

3% of the residual moisture of the product.)

□    Prevention of defects in adhesion, bleaching and possession control of
areas with poor concrete possession, heavy absorption of old-fashioned

 

membrane areas, winter season, cement detection, or beauty surface

You must paint the primer too much for .

□    When painting (including TOUCH UP painting), the same product, color, LOT, dilution ratio, painting apparatus, painting room

Depending on the law, exotic phenomena may occur, so paint by the same LOT product, same painting tool, and method as much as possible, but work if there is no abnormality after checking the color.

□     Painting is prohibited on areas where oil-based paint such as wood, steel, and plastic is painted due to poor adhesion. (Check Consumer Counseling Office)

□      If there are pinholes or small holes on the surface before tile construction, additional application is applied to the area.

□   Waterproof paint is a chemical product, so after opening the can, there is a high risk of product deterioration due to external contamination, so use it after opening.

 

 

Precaution s for handling

□   Do not freeze when storing waterproof paint.

□    Store the product at room temperature (5-35℃) to avoid fire and direct sunlight. Make sure to seal the container and store the remaining amount in the same way with the lid closed so that air is not polluted.

□    Dispose of waste paint through the waste treatment company designated by the Ministry of Environment.

□   Since this product is a chemical product, it may deteriorate when stored for a long time, so please use it within the expiration date. Please check with our consumer counseling office before using it.

□   Keep it sealed for reuse after opening.

 

All data are based on laboratory testing and practical experience. The information is believed to be accurate, however without any obligation.

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Model No.: AQUAS COAT SA-9 (Super-Dry MuLtipurpose Waterproof Materia)”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *